S&C 2000 series Installation

Reorder Information for Safety Labels
Location Safety Alert Message Description Number
A
WARNING
Do not remove steel outer wrapper...
G-5993
▲
B
WARNING
Do not remove steel over wrapper until installation is complete...
G-5699

C
CAUTION
This shield must be removed during installation...
G-6043
▲
D
CAUTION
Lifting instructions…
161 kV
G-5995

230 kV
G-5994

E
CAUTION
Connect the insulated operating rod…
G-5950

F
Instruction
Connecting-Pin Installation… G-5952
G
CAUTION
Transition box contains a stop bracket and spacer…
G-5807

H
Instruction
Instructions for attaching operator connecting link…
G-5792

J
CAUTION
Control Voltage
48 Vdc G-5948-1
125 Vdc G-5948-2
115 V 60 Hz G-5948-3
K
Instruction
Instructions for Fuse Slugs
G-5939

L
CAUTION
Do not apply control voltage to this device or insert…
G-5959

M
CAUTION
Do not apply control voltage to this device or manually...
G-5945

N
CAUTION
Do not attempt to close the circuit-switcher using manual trip
lever
G-6222

P
Instruction
Instructions — Operation, Gas-Pressure Indicator
G-5672

Q
CAUTION
Connect the interphase drive lever to the operator uni-ball
coupling with the attached pin.
G-5949

 This is a tag that is to be removed and discarded after the switch is installed and adjusted.
 This label contains important instructions and should be promptly replaced if illegible or missing.
▲ This label is affixed to the shipping package and will be removed and discarded after the switch is installed and adjusted.
Safety Information
6 S&C Instruction Sheet 716-502

S&C 2000 series Specifications

General

Brand	S&C
Model	2000 series
Category	Switch
Language	English