Understanding
Safety-Alert Messages
Several types of safety-alert messages may appear throughout this instruction sheet
and on labels attached to the IntelliRupter PulseCloser Fault Interrupter. Familiarize
yourself with these types of messages and the importance of these various signal words:
DANGER
“DANGER” identifies the most serious and immediate hazards that will likely
result in serious personal injury or death if instructions, including recommended
precautions, are not followed.
WARNING
“WARNING” identifies hazards or unsafe practices that can result in serious
personal injury or death if instructions, including recommended precautions, are
not followed.
CAUTION
“CAUTION” identifies hazards or unsafe practices that can result in minor personal
injury if instructions, including recommended precautions, are not followed.
N OTICE
“NOTICE” identifies important procedures or requirements that can result in
product or property damage if instructions are not followed.
Following
Safety Instructions
If you do not understand any portion of this instruction sheet and need assistance,
contact your nearest S&C Sales Ofce or S&C Authorized Distributor. Their telephone
numbers are listed on S&C’s website sandc.com, or call the S&C Global Support and
Monitoring Center at 1-888-762-1100.
N OTICE
Read this instruction sheet thoroughly and carefully
before installing or operating your IntelliRupter
PulseCloser Fault Interrupter.
Replacement
Instructions and Labels
If additional copies of this instruction sheet are needed, contact your nearest S&C Sales
Ofce, S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the equipment be
replaced immediately. Replacement labels are available by contacting your nearest
S&C Sales Office, S&C Authorized Distributor, S&C Headquarters, or S&C Electric
Canada Ltd.
Safety Information
4 S&C Instruction Sheet 766-520
To Next Page
Loading...
Need help?
General
