Sanyo CH3642 - Auto. Mode for Automatic Heating;Cooling Switching

II - 11
SM830082
1
2
3
4
Section
5
2. Processes and functions
2-9 Auto. Mode for Automatic Heating/Cooling Switching
❑ When the AUTO mode is selected, the microprocessor calculates the difference
between the set temperature and the room temperature, and automatically switches
to the COOLING or HEATING mode to maintain the desired temperature.
Room temp. ] Set temp. ➔ COOLING
Room temp. < Set temp. ➔ HEATING
This means that if the room temperature is higher or equal to the set temperature,
COOLING operation starts. If the room temperature is lower than the set
temperature, HEATING operation starts.
Fig. 12
COOLING SELECTION TEMP.
+5 deg
SHIFT SET TEMP.
+4 deg
REMOTE CONTROLLED
SET TEMP.
SHIFT SET TEMP.
–4 deg
HEATING SELECTION TEMP.
–6 deg
HEATING COOLING HEATING
1142_THS_I
A
B
C