-E33-
Setting Language
1. Press [SETUP] in the stop mode.
The setup screen appears.
“Language” is highlighted.
2. Press [ENTER].
“Language” screen appears.
3. Press [p] or [o] to select the item (highlighted).
Example:
INITIAL SETTINGS
Once the initial settings have been completed, the unit can
always be operated under the same conditions.
The settings will be retained in the memory until they are changed,
even if the power is turned off.
Notes:
• In this instruction manual, the language in on-screen
display is English.
If you change the language, please follow the selected
language in on-screen display.
• The disc information takes priority in various setting.
• For improvement, on-screen displays subject to change
without notice.
4. Press [ENTER].
The submenu appears.
Example:
5. Press [p] or [o] to select the language (highlighted).
6. Press [ENTER].
The selected language remains.
7. Repeat steps 3 ~ 6 for other items.
Note:
If “Others” is selected, enter the language code. (See
“Language Code List” on page E38.)
8. Press [o] to skip back to the setup screen (or press [SETUP]).
To Next Page
Loading...
Need help?
General
