-E42-
SPECIFICATIONS
DVD Receiver (DWM-4500)
DVD Video Player
Signal format: NTSC color
Laser: Semiconductor laser, wavelength 650/790 nm
Wow and flutter: Below measurable level
FM Tuner
Frequency range: 87.9 MHz ~ 107.9 MHz (200 kHz steps)
Usable sensitivity: 20.2 dBf (mono)
Inputs/Outputs
SYSTEM: System cable terminal
FM ANT.: FM antenna terminal
PHONES: Stereo headphones jack
General
Dimensions (W x H x D):
Approx. 11.9" x 8.5" x 5.3" (302 x 215 x 134 mm)
Weight: Approx. 4.7 lbs (1.7 kg)
Sub-woofer
(Powered Speaker, ASX-DWM-4500W)
Amplifier
Front Amplifier
Continuous minimum sine wave RMS power output
per channel into 4 ohms at 1kHz with no more than
10% total harmonic distortion (with Center/Sub-
woofer amplifier off) ................................ 100 Watts
Center Amplifier
Continuous minimum sine wave RMS power output
into 4 ohms at 1kHz with no more than 10% total
harmonic distortion (with Front/Sub-woofer ampli-
fier off) ....................................................... 100 Watts
Sub-woofer Amplifier
Continuous minimum sine wave RMS power output
into 4 ohms at 100Hz with no more than 10% total
harmonic distortion (with Front/Center amplifier
off) .............................................................. 100 Watts
Inputs/Outputs
SYSTEM: System cable terminal
AUX (L/R): 1 V/47 kΩ
S-VIDEO OUT:
Y: 1.0 Vp-p (75 Ω) C: 0.286 Vp-p (75 Ω)
VIDEO OUT: 1.0 Vp-p (75 Ω)
COMPONENT VIDEO OUT:
Y: 1.0 Vp-p (75 Ω)PB, PR: 0.7 Vp-p (75 Ω)
SPEAKERS:
FRONT (L/R): 4 Ω CENTER: 4 Ω
REAR OUT: Assistant speaker cable output jack
Transmitter
Built-in type, 914.1 MHz ~ 915.3 MHz, 4ch selectable
Subwoofer
Unit used (non-magnetic shield):
5.1" (13 cm) diameter, Cone type
Maximum power handling capacity: 110 W (peak)
Nominal impedance: 4 Ω
General
Power requirements: AC 120 V, 60 Hz
Power consumption: 76 W
Dimensions (W x H x D):
Approx. 6.1" x 1.8" x 16" (154 x 415 x 407 mm)
Weight: Approx. 20.5 lbs (9.3 kg)
Front Speaker (DWM-4500S)
Unit used (magnetic shield):
3.1" (8 cm) diameter, Cone type, Full range
Maximum power handling capacity: 100 W (peak)
Nominal impedance: 4 Ω
Dimensions (W x H x D):
Approx. 3.8" x 8.5" x 3.7" (96 x 216 x 95 mm)
Weight: Approx. 2.9 lbs (1.3 kg) (per speaker)
Center Speaker (DWM-4500C)
Unit used (magnetic shield):
3.1" (8 cm) diameter, Cone type x 2
1" (2.5 cm) diameter, Tweeter x 1
Maximum power handling capacity: 100 W (peak)
Nominal impedance: 4 Ω
Dimensions (W x H x D):
Approx. 10.7" X 3.9" X 3.1" (272 X 98 X 78 mm)
Weight: Approx. 2.9 lbs (1.3 kg)
Rear Speaker
(Powered Speaker, ASX-DWM-4500R)
Amplifier
Surround Amplifier
Continuous minimum sine wave RMS power output
per channel into 4 ohms at 1kHz with no more than
10% total harmonic distortion ................. 50 Watts
Unit used (non-magnetic shield):
3.1" (8 cm) diameter, Cone type x 2
Maximum power handling capacity: 60 W (peak)
Nominal impedance: 4 Ω
Input/Output
REAR IN: Assistant speaker cable input jack
EXTERNAL SPEAKERS (L/R): 4 Ω
Receiver
Built-in type, 914.1 MHz ~ 915.3 MHz, 4ch selectable
General
Power requirements: AC 120 V, 60 Hz
Power consumption: 30 W
Dimensions (W x H x D):
Approx. 18.9" x 4.7" x 7.6" (480 x 120 x 193 mm)
Weight: Approx. 10.6 lbs (4.8 kg)
IMPORTANT INFORMATION
Because its products are subject to continuous improvement,
Sanyo reserves the right to modify product designs and
specifications without notice and without incurring any obligation.
To Next Page
Loading...
Need help?
General
