-E37-
Setting Parental
Note:
If you set “TVGuardian”, set it first.
See “Setting TVGuardian®” on page E29.
1. Press [SETUP] in the stop mode.
The setup screen appears.
2. Press [a] to select “Parental”.
3. Press [ENTER].
“Parental” screen appears.
Setting “Level”
1) Press [p] to skip “Password ----” and select “Level”.
2) Press [ENTER] repeatedly to select the parental lock
level (“Level 1” ~ “Level 8”).
Example: To select “Level 1”
Parental Control
MPAA (Motion Picture Association of America) Guideline is a
rating system that provides advanced cautionary information to
parent about the content of movie programs.
The parental lock level is equivalent to the following MPAA
Rating System.
Level 8: Adult
Level 7: NC-17 (No one 17 and under admitted)
Level 6: R (Restricted)
Level 4: PG-13 (Parents strongly cautioned)
Level 3: PG (Parental guidance suggested)
Level 1: G (General audiences)
Some DVD discs contain a restriction level which enables
parents to prevent playback of discs by children. This unit is
equipped with a password designed to prevent children changing
the level.
You cannot play DVD video discs rated higher than the level
you selected unless you cancel the parental lock function.
For example, when you select level “5”, the unit will not play
discs with ratings of “6”, “7” or “8”.
The information will appear on the TV screen.
Note:
DVD video discs may or may not respond to the parental lock
settings. Make sure this function works with your DVD video
discs.
To Lock the Disc Door
First, select “Disc Lock On”.
You can lock the disc door to prevent misuse of young children.
While the disc door is opened, press the q button (main unit)
until “LOCKED” appears on the display.
• The q button will not function.
To release this mode, press the q button until “UNLOCKED”
appears.
If you forget the password…
Enter “788444” even if 4 digits “----” appears, then press [ENTER]
to clear the current password.
Enter a new password and set the parental lock level again.
Setting “Disc Lock”
1) Press [p] to select “Disc Lock”.
2) Press [ENTER]. The submenu (“On” and “Off”) appears.
3) Press [5] or [4] to select “On” or “Off”.
4) Press [ENTER].
4. Press [4] to select “Password”.
5. Press the number buttons to enter the 4 digits password.
6. Press [ENTER].
The password is now set.
Note:
If you make a mistake, press [CLEAR].
Note:
If you do not set it, Parental Control does not work, and it
returns to the initial settings.
7. Press [SETUP].
The setup screen disappears.
To Next Page
Loading...
Need help?
General
