EasyManuals Logo

Sanyo DWM-4500 User Manual

Sanyo DWM-4500
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
-E36-
Setting Audio
The sound from speakers can reach the listening position at
different times depending the speaker placements. You can
allow for this difference by changing the delay time of the center
and surround speakers.
You also can change the Dynamic Range Control (DRC).
1. Press [SETUP] in the stop mode.
The setup screen appears.
2. Press [a] to select “Audio”.
3. Press [ENTER].
“Audio” screen appears.
10. Press [ENTER].
“Center Delay” and the selected delay time remain.
11. Press [p] to select “Surr Delay”.
12. Press [ENTER].
The submenu (“0ms”, “5ms”, “10ms” and “15ms”) appears.
13. Press [p] or [o] to select the rear speaker (surround left and
right speakers) delay time.
Rear speaker (Surround left and right speakers) delay
time
If D1
D3, set the delay time to “0ms”.
If D1>D3, set the delay time as follows:
Difference between D1 and D3 Delay time
5 feet (Approx. 150cm) 5ms
10 feet (Approx. 300cm) 10ms
15 feet (Approx. 450cm) 15ms
14. Press [ENTER].
“Surr Delay” and the selected delay time remain.
15. Press [o] to skip back to the setup screen (or press [SETUP]).
D1: The distance from the front speaker
D2: The distance from the center speaker
D3: The distance from the rear speaker
Front left speaker Front right speaker
Center speaker
Rear speaker (Surround left and right speakers)
D1
D2
D3
D1
4. Press [ENTER] to select “Audio DRC”.
The submenu (“On” and “Off”) appears.
5. Press [p] or [o] to select “On” or “Off” as desired.
On: It will compress the dynamic range. It may have no
effect with some discs.
Off: Sound with a wide dynamic range.
6. Press [ENTER].
“Audio DRC On” or “Audio DRC Off” remains.
7. Press [p] to select “Center Delay”.
8. Press [ENTER].
The submenu (“0ms”, “1ms”, “2ms”, “3ms”, “4ms” and “5ms”)
appears.
9. Press [p] or [o] to select the center speaker delay time.
Center speaker delay time
If D1
D2, set the delay time to “0ms”.
If D1>D2, set the delay time as follows:
Difference between D1 and D2 Delay time
1 foot (Approx. 30cm) 1ms
2 feet (Approx. 60cm) 2ms
3 feet (Approx. 90cm) 3ms
4 feet (Approx. 120cm) 4ms
5 feet (Approx. 150cm) 5ms

Table of Contents

Other manuals for Sanyo DWM-4500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo DWM-4500 and is the answer not in the manual?

Sanyo DWM-4500 Specifications

General IconGeneral
BrandSanyo
ModelDWM-4500
CategoryHome Theater System
LanguageEnglish

Related product manuals