24
MENU OPERATION (TV/ AV mode)
All receivable channels are automatically tuned in and memorized
in consecutive programme position.
ƔAfter all receivable channels have been found and stored, the TV
set will automatically return to programme position “1”.
Note:
Ɣ
The CHANNEL menu doesn't work except for TV mode.
Ɣ
In PIP mode, the CHANNEL mode doesn't work except for
the main picture is TV mode .
Press POINT Ź button will move tuning toward the higher
frequencies, and press POINT Ż will move tuning toward the
lower frequencies.
Press and release POINT ŻorPOINT Ź button to search for
required TV station. Once a station is located, searching will
automatically stop. Continue till desired channel is located.
Use to preset a receivable channel in any desired programme
position, e.g. the position with the same number as the channel.
Select channel “3”.
Press POINT
ŻŹ to start the channel searching.
Manual search a channel if it cannot be automatically tuned, such
as when the signal is poor.
Press and hold POINT Ż or POINT Ź button to search for
required TV station.
Select channel “3”.
Press POINT
ŻŹ
to
start the channel searching.
Enter into "CHANNEL" menu, pressing POINT Ÿźbuttons to
select "MANUAL SEARCH".
CHANNEL
SCREEN MENU
Press MENU button and the main menu will appear. Press
POINT ŻŹ buttons to select "CHANNEL", and will display
CHANNEL menu.
Press POINT Ÿź buttons to select the item desired.
Press POINT ŻŹ buttons to adjust value.
Ŷ Press BACK button to return to the previous menu.
Ŷ Press MENU button or wait for 5~60 seconds (refer to
"DURATION" on page 29) to exit menu operation.
AUTO SEARCH MENU
SEMI-AUTO SEARCH MENU
MANUAL SEARCH MENU
AUTO SEARCH
SEMI-AUTO SEARCH
Enter into "CHANNEL" menu, pressing POINT Ÿźbuttons to
select "SEMI-AUTO SEARCH".
MANUAL SEARCH
1
2
3
1
2
3
4
Ŷ Press BACK button to return to the previous menu.
Ŷ Press MENU button or wait for 5~60 seconds (refer to
"DURATION" on page 29) to exit menu operation.
1
2
3
4
Ŷ Press BACK button to return to the previous menu.
Ŷ Press MENU button or wait for 5~60 seconds (refer to
"DURATION" on page 29) to exit menu operation.
LCD-CA9S-A NEW.indd 24 2/06/2008 2:08:23 PM
To Next Page
Loading...
Need help?
General
