85
12
INSTALLATION
Wiring
1. Harness (a white connector) from the solenoid valve is connected to the connector of the upper same
color of the back-up system.
2. It passes through the wiring ass’y DS (one white connector and two red connectors) from the door
switch ass’y from the outside of the solenoid, and each upper of the back-up system ass’y is connected
with the connector of the same color.
3. Wiring ass’y BP (white connector) from the freezer itself is connected with the connector of the upper
same color of the back-up system ass’y.
WARNING
There is a terminal (AC 100V) of the high voltage in the back-up system. Attach the back-up unit
cover before starting the trial operation. The operation without the cover may cause electric shock.
Connect the connection of the connector until you have clicking sound.
To Next Page
Loading...
Need help?
General
