Sanyo PLC-WXU700A - Setting up the Projector

73
Setting up the projector
Click Setting on the main menu. This function is to set up the projector. Select the
sub menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting.
Item Description
Screen........................Switches the screen mode. There may not be available
mode depending on the input mode as shown in the
table below.
 The mark "" indicates the available screen mode in the selected input
source system. The error message appears when the disabled screen mode
indicated with "*" is selected.
Setting up the projector
Input source
Screen mode Video Computer
Normal

True * 
Full 
Zoom  *
Wide  *
Natural wide  *
Custom 