Sanyo PLC-WXU700A - Operation During Image Viewer in the Manual;Program Mode; Operation During Playback Movie File; Termination of Memory Viewer

9
Termination of memory viewer
To terminate the memory viewer function, take one of methods described below.
- Terminate with projector's on-screen menu.
1. Select “Wired” or "Wireless" from the input menu of the projector. Press SELECT button.
2. Select "Memory Viewer" with the point ! buttons and press SELECT button. The "Enter/Exit" pallet
of the memory viewer appears.
3. Select "Exit" and press SELECT button.
- Terminate with memory viewer mode
1. During the image displaying, press AUTO SET/CANCEL button. The browser window appears on the
screen.
2. Press AUTO SET/CANCEL button again. The cursor moves to menu item.
3. Select "Exit" on the browser window with the point buttons and press SELECT button.
Operation during playback movie file
During the playback of the movie files, by the following number of times pressing the point buttons,
you can pause, review or forward the playback.
Operation during image viewer in the manual/program mode
During displaying the image, you can control the displayed image with control buttons as described in
the table below.
* The display time of the image and the number of repeat at the auto-playback mode are set up
from the "Set" menu on the browser window. (p.7)
*
The scrolling of the text file can be operated only in the manual mode.
Point Operation
! Manual playback with previous file
M
anual playback with next file
 S
tart auto-playback* (program mode), or scroll down during displaying the text file*
 S
top auto-playback* (program mode), or scroll up during displaying the text file*
Point Operation
! Manual playback with previous file
 Manual playback with next file
 or x1/2/3/4 See the figure below
X 4  X3  X 2  X1  X 1  X 2  X 3
Pause Forward
normal
speed
Forward
in 2
double
speed
Forward
in 4
double
speed
Review
in 2
double
speed
Forward
in 8
double
speed
Review
in 4
double
speed
Review
in 8
double
speed