Sanyo PLC-XF47 - Page 132

- 132 -
Electrical Adjustments
– 45 CLP_U 0 ~ 1023 0 –
– 46 CLP_D 0 ~ 1023 0 –
– 47 VCKP 0 ~ 2047 49 –
– 48 VCKPD 0 ~ 2047 1344 –
– 49 VSTP 0 ~ 255 125 –
– 50 DFT_ON 0 ~ 1 0 –
– 51 HPC_R_DAT0 0 ~ 8191 0 –
– 52 HPC_R_DAT1 0 ~ 8191 0 –
– 53 HPC_G_DAT0 0 ~ 8191 0 –
– 54 HPC_G_DAT1 0 ~ 8191 0 –
– 55 HPC_B_DAT0 0 ~ 8191 0 –
– 56 HPC_B_DAT1 0 ~ 8191 0 –
– 57 SCAN_HP 0 ~ 2047 49 –
S 910 – CXD3540_DSD_PRE
– 0 USR_R_GAIN 0 ~ 1023 512 –
– 1 USR_G_GAIN 0 ~ 1023 512 –
– 2 USR_B_GAIN 0 ~ 1023 512 –
– 3 USR_R_BRIGHT 0 ~ 8191 0 –
– 4 USR_G_BRIGHT 0 ~ 8191 0 –
– 5 USR_B_BRIGHT 0 ~ 8191 0 –
– 6 FRM_DAT 0 ~ 255 0 –
– 7 SEL_MODE 0 ~ 7 0 –
– 8 RLR_DUM_PIX 0 ~ 127 4 –
S 920 – CXD3540_GAM
– 0 GAM_OM 0 ~ 1 1 –
– 1 GAM_R_GAIN 0 ~ 1023 512 –
– 2 GAM_G_GAIN 0 ~ 1023 512 –
– 3 GAM_B_GAIN 0 ~ 1023 512 –
– 4 GAM_R_GRIGHT 0 ~ 8191 0 –
– 5 GAM_G_GRIGHT 0 ~ 8191 0 –
– 6 GAM_B_GRIGHT 0 ~ 8191 0 –
S 930 – Lamp Mpde Change (Factory use only)
– 0 ALL Lamp Mode Data 0 is displayed, set data 10 and selection is activated. 0 ~ 10 0 –
Data 11 is displayed when selection is accomplished.
Data 99 is displayed while cooling and selection is disabled,
wait until it is changed to data 0.
– 1 2 Lamp Mode 1-4 or 1 0 ~ 10 0 –
– 2 2 Lamp Mode 2-3 or 2 0 ~ 10 0 –
S 931 – Lamp Factorl Time (Factory use only)
– 0 All to 2L-1 Lamp Mode Changing Time for Factory (sec.) Step :10 50 ~ 200 50 –
– 1 2L-1 to 2L-2 Lamp Mode Changing Time for Factory (sec.) Step :10 50 ~ 200 120 –
– 2 2L-2 to All Lamp Mode Changing Time for Factory (sec.) Step :10 50 ~ 200 120 –
– 3 All to 2L-2 Lamp Mode Changing Time for Factory (sec.) Step :10 50 ~ 200 50 –
– 4 2L-2 to 2L-1 Lamp Mode Changing Time for Factory (sec.) Step :10 50 ~ 200 120 –
– 5 2L-1 to All Lamp Mode Changing Time for Factory (sec.) Step :10 50 ~ 200 120 –
S 940 – CXD3540_VXT
– 0 VXT_DETECT_ON 0 ~ 1 1 –
– 1 VXT_GSEL 0 ~ 3 2 –
– 2 VXT_RCALC 0 ~ 1 0 –
– 3 VXT_GCALC 0 ~ 1 0 –
– 4 VXT_BCALC 0 ~ 1 0 –
– 5 VXT_ON 0 ~ 1 0 –
– 6 VXT_RDATU1 0 ~ 255 8 –
– 7 VXT_RDATU2 0 ~ 255 9 –
– 8 VXT_RDATU3 0 ~ 255 22 –
– 9 VXT_GDATU1 0 ~ 255 8 –
– 10 VXT_GDATU2 0 ~ 255 9 –
– 11 VXT_GDATU3 0 ~ 255 22 –
– 12 VXT_BDATU1 0 ~ 255 8 –
– 13 VXT_BDATU2 0 ~ 255 9 –
– 14 VXT_BDATU3 0 ~ 255 22 –
– 15 VXT_RDATL1 0 ~ 255 4 –
– 16 VXT_RDATL2 0 ~ 255 5 –
– 17 VXT_RDATL3 0 ~ 255 11 –
– 18 VXT_GDATL1 0 ~ 255 4 –
– 19 VXT_GDATL2 0 ~ 255 5 –
– 20 VXT_GDATL3 0 ~ 255 11 –
– 21 VXT_BDATL1 0 ~ 255 4 –
Group
No.
Data
Range
Initial Value
Function
Item
No.
Item
PLC-XF47