Printed marker comes always to
the position of the figure.
Dichroic mirror
Condenser Lens(OUT)
Condenser Lens(IN)
Plane surface comes
this side.
PBS and Integrator lens (OUT)
Integrator lens (In)
Slot part comes this top
side.
Slot part comes this
top side.
Integrator lens should be placed
as rugged surface side comes to
the Holder side.
Integrator lens should be placed
as rugged surface side comes to
the Holder side.
Printed marker comes
this position.
(The lower side of back)
Film attached side comes to
this side.
Polarized glass (green, Blue)
Prism Ass'y
Film attached
side.
Polarized glasses should be placed as
the film attached side comes to the
LCD panel side.
Rugged surface
side
The arrow mark points at the LCD
panel.
LCD
panel
- 54 -
Polarized glass (Red)
Prism Ass'y
Film attached
side.
Polarized glasses should be placed as
the film attached side comes to the
LCD panel side.
Film attached side.
To Next Page
Loading...
