24
Basic Operation
6RXQG$GMXVWPHQW
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point Ÿź buttons to select Sound.
Press the Point Ź or the SELECT button to access
the submenu items.
Press the VOLUME+/– buttons on the top control or on
the remote control to adjust the volume. The volume
dialog box appears on the screen for a few seconds.
Press the MUTE button on the remote control to select
On to temporarily turn off the sound. To turn the sound
back on, press the MUTE button again to select 2II or
press the VOLUME +/– buttons. The Mute function is
also effective for the AUDIO OUT jack.
Press the SELECT button to switch the mute function 2Q
2II. When the sound is turned off, On is displayed. Press
the VOLUME +/– buttons again or adjust MIC gain’s
volume to turn the sound back on.
Use the Point Ÿź buttons to select the desired
submenu item and press the SELECT button to
access the selected item.
Volume
Volume
Mute
Press the Point Ź button to turn up the volume; Press
the Point Ż button to turn down the volume.
Mute
Menu Operation
Sound Menu
9ROXPH'LDORJ%R[
5HPRWH&RQWURO
92/80(EXWWRQ
92/80(EXWWRQ
087(EXWWRQ
7RS&RQWURO
Approximate level of
the volume.
Press the MUTE button to set the Mute
function On or 2II. The dialog box
disappears after 4 seconds.
Direct Operation
92/80(EXWWRQV
Use the Point Ÿź buttons to switch the MIC function
On/2IIand then press the SELECT button. When On is
selected, the synthesis volume (MIC and RCA) is output.
0,&
0,&JDLQ
Press the Point Ź button to turn up the MIC mixing gain;
Press the Point Ż button to turn down the MIC mixing
gain.
31RWH
• When 2II is selected in MIC function, the
MIC gain and Standby MIC out functions are
not available.
• Only the Standby mode is set to Network,
6WDQGE\0,&RXW can be selected.
• If the MIC function is turned on when
connecting PC audio to the AUDIO IN (a mini
jack), loud sound may be output suddenly
depending on the setting value of MIC gain.
6WDQGE\0,&RXW
When switch the Standby MIC out function On and in
Standby mode statusonly MIC volume can be output.
To Next Page
Loading...
