Sanyo PLC-XL50A - Connecting External Equipment

- 16 -
2. Remove the 2 DEC Legs.
3. Remove the 2 screws-B (M3x35).
4. Remove the 2 Stand Legs and Cap Stand Legs.
DEC Leg
B
B
DEC Leg
Stand Leg
Cap Stand Leg
Stand Leg
Cap Stand Leg
Stand Plate
2
Lamp Unit and Alarm Battery removal.
1. Remove the screw-A(M3x8) and remove the Lamp cover.
2. Loosen the 2 screws-B and remove the Lamp uint.
3. Remove the Air Filter upward.
Lamp Cover
A
B
Lamp Unit
Air Filter
Mechanical disassemblies