- 77 -
PIN NO. PORT NO. SIGNAL NAME DESCRIPTION I/O
413 N5 BLAST_AC Power Control , Power ON : H O
182 N2 CABLE_SW Long Cable Switch Output, Long Cable ON : H O
89 N1 LAMPDC_ON Lamp Control, Power ON : H O
267 N3 S_SW S-Video Input Switch I
474 N6 WAKEUP for I/O Expander O
183 M2 XRESET O
90 M1 XSTDBY EN O
268 M3 MONIT_OUT Monitor Out/Computer Switch Monitor Out : H O
345 M4 ON_3.3V 3.3V Power Drive Power ON : H O
346 L4 PW_POWER_LED_EX LED Indicator O
91 L1 PW_READY_LED_EX LED Indicator O
184 L2 PW_TEMP_LED_EX LED Indicator O
290 L3 PW_LAMP_LED_EX LED Indicator O
94 H1 PW_FILTER_LED_EX LED Indicator O
92 K1 DC_ON_EX O
165 K2 LAMP_DET Lamp Detect i
187 H2 COMP_SW Component Detect O
419 G5 I/O TC Alarm O
188 G2 I/O CLK0 Alarm O
95 G1 INH Alarm O
96 F1 I/O_RXD0 Alarm O
273 G3 MCU_STAT Eco Standby Mode I
189 F2 PW_MASTER_SDI Eco Standby Mode O
420 F5 PW_MASTER_SCK Eco Standby Mode O
97 E1 PW_MASTER_SD0 Eco Standby Mode I
353 E5 FPGA_STATUS Config Status Signal I
190 E2 FAULT Alarm O
352 E4 STB_FPGA FPGA Chip Select (Strobe) O
276 D3 FPGA_CONFIG_DONE Config Process End Signal I
99 C1 CONFIG_FPGA Config Start Pin O
101 B2 BATT Alarm O
Control port functions
Scaler I/O Port Functions (PW190) (Continue)
To Next Page
Loading...
