Sanyo PLC-XP57L - Terminal Configurations and Optional Parts

- 58 -
158Port A7 PW_SCL_DDC_D O
64 Port A6 PW_SDA_DDC_D I/O
325 Port A5 PW_SCL_3V O
246 Port A4 PW_SDA_3V I/O
159Port A3 PW_SCL_EEP O
64 Port A2 PW_SDA_EEP I/O
398 Port A1 PW_SCL_DDC_A O
247 Port A0 PW_SDA_DDC_A I/O
156Port B7 SC_SEM_DPRAM H fixed O
59 Port B6 SC_INT_DPRAM Active L I
69 Port B5 SC_CHK_DPRAM Active L I
61 Port B4 PW_BSY PW busy signal L=busy O
157Port B3 SH_BSY SH busy signal L=busy I
62 Port B2 SH_PW_0 Active L I
326 Port B1 CG_OUT PC/Network switch_1 H=network O
245 Port B0 PW_SH_RESET Active H O
84 Port C7 SP_OFF Speaker output mute L=mute O
341 Port C6 NET_OUT PC/Network switch_2 L=network O
264 Port C5 A_MUTE Audio mute L=mute O
263 Port C4 M_OUT Monitor output L=monitor-out O
265 Port C3 BRAND_OP3 Brand option_3 I
178Port C2 BRAND_OP2 Brand option_2 I
180Port C1 BRAND_OP1 Brand option_1 I
412 Port C0 BRAND_OP0 Brand option_0 I
50 Port E7 YUV_ON Composite or other signal selection H=CV or YUV O
389 Port E6 PW_FLASH_WP H=write protect O
391 Port E5 DVI_HOT DVI hot plug H=DVI reset O
315 Port E4 AV_SW2_PW AV composite sync switch O
235 Port E3 AV_SW1_PW (SW1/2: L/L=S-video, H/L=RGB_csync, - /H=SCART_CV) O
316 Port E2 BNC/RCA 5-BNC/D-sub or RCA(YUV) selection H=RCA O
393 Port E1 PW_EEP_WP H=write protect O
317 Port E0 S_SW S-Video detection switch L=connected I
387 Port F7 PROD_OPT Pull-up I
144Port F6 TRM1 Active H O
47 Port F5 TRM2 Active H O
145Port F4 PW_SYS_SW Active L O
48 Port F3 VDD_RESET IC9201<AV A/D> reset signal L=reset O
234 Port F2 PW_SH_0 Active H O
390 Port F1 DDC_SW_PW H/L=HDCP/PC O
388 Port F0 DDC_WRITE_PW H/L=write/read O
386 Port G7 SWF_DCM_LOCK SWFPGA lock signal H=lock I
45 Port G6 KEY_WP H=WP_ON O
451 Port G5 SWF_SIG_SEL Network option or DVI/HDCP selection at SWFPGA H=Network O
313 Port G4 SWF_DCM_RESET SWFPGA reset signal L=reset O
232 Port G3 AUDIO_SW2_PW Audio SW 2 (SW1/2: L/L=IN-1, H/L= IN-2, L/H=IN-3) O
143Port G2 AUDIO_SW1_PW Audio SW 1 O
46 Port G1 SP_MUTE_PW Audio mute (speaker and monitor output) L=mute O
314 Port G0 IN1/IN2_PW Input 1/Input 2 selection L=IN1, H=IN2 O
Pin No. Name Function Name Function Polarity I/O
● I/O Port Table (IC301, PW388B)
Control Port Functions