Need help?Do you have a question about the Sanyo PLC-XP200L and is the answer not in the manual?
General| Vertical scan range | 48 - 100 Hz |
|---|---|
| Horizontal scan range | 15 - 100 kHz |
| Projection technology | LCD |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | ±40 ° |
| Lamp type | NSH |
| Lamp power | 330 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 3000 h |
| Bundled software | User Manual (CD ROM) |
| I/O ports | DVI-D (digital/HDCP) D-Sub15 (RGB/SCART-RGB) 5 x BNC (RGBHV/Composite/Y-Pb/Cb-Pr/Cr) 3 x RCA (Video/Y-Pb/Cb-Pr/Cr) Mini DIN 4 (S-Video) 3.5 mm Stereo Jack D-Sub15 D-Sub9 (RS232) 3.5 mm Stereo Jack (cable remote control) USB type B |
| Compatibility | UXGA SXGA SXGA+ WXGA XGA S-VGA VGA Mac |
| Dimensions (WxDxH) | 370 x 440 x 187 mm |
| Power requirements | 100 - 240 V |
| Power consumption (standby) | 24.5 W |
| Power consumption (typical) | 499 W |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 5 - 40 °C |
| Placement | Ceiling |
Weight and Dimensions| Weight | 11400 g |
|---|---|
| Package weight | 15900 g |
Important safety measures and warnings for projector operation and installation.
Ensures reliable operation and prevents overheating by keeping openings clear.
Guidelines for installing and positioning projector to avoid reduced lamp life and hazards.
Step-by-step guide for powering the projector on/off and using the on-screen menu.
Covers system selection, auto/manual PC adjustment, image levels, and screen size.
Configuring power management, pointer, security locks, and shutter functions.
Managing lamp/filter counters, and PIN code lock settings.
Filter function, replacement procedures, and counter resets.
Lamp replacement procedure, handling safety, and precautions.
Solutions for various projector problems and error messages.
To Next Page
