Sanyo PLC-XP200L - Input Selection; Input

35
Input
Remote Control button operation
INPUT button
Press the INPUT button on the side control or the remote
control. It switches to INPUT 1, INPUT 2, and INPUT 3 as
you press the INPUT button.
Before using the INPUT button on the side control or the
remote control, you must select a correct input source
by On-Screen Menu and the latest input source will be
displayed.
INPUT button
Input 1
Input 2
Input 3
Side Control/Remote control button
operation
Input Selection
Press the INPUT 1, INPUT 2, or INPUT 3 buttons on the
remote control. The input source appears on the screen as
you press each button. Select the connected input source.
INPUT buttons
INPUT 1 button
Input 1
RGB (PC analog)
RGB (Scart)
RGB (PC digital)
RGB (AV HDCP)
INPUT 2 button
Input 2
Video
Y,Pb/Cb,Pr/Cr
RGB
INPUT 3 button
Input 3
Video
Y,Pb/Cb,Pr/Cr
S-video
Remote Control Operation
Side Control/Remote control Operation
Remote Control
Side Control
Remote Control
INPUT button