Sanyo PLC-XP57L User Manual (English)

Other manuals for Sanyo PLC-XP57L

Service Manual122 pages

Specifications2 pages

Questions and Answers:

B
Brian HorneAug 14, 2025
What to do if my Sanyo PLC-XP57L Projector has no image?
- M
  marymillerAug 14, 2025
  If you're not getting any image from your Sanyo Projector, first, verify the connection between your computer or video equipment and the projector. Note that it can take about 30 seconds for the image to appear when turning on the projector. Ensure the selected system corresponds to your computer or video equipment. Lastly, confirm that the ambient temperature is within the specified operating range of 41°F–95°F (5°C–35°C).
S
Shelby JordanAug 17, 2025
How to fix a left/right reversed picture on Sanyo PLC-XP57L?
- M
  millererinAug 17, 2025
  To correct a left/right reversed picture on your Sanyo Projector, check the Ceiling/Rear function.
N
nealelizabethAug 21, 2025
How do I fix a top/bottom reversed picture on my Sanyo PLC-XP57L?
- D
  Danny BennettAug 21, 2025
  To correct a top/bottom reversed picture on your Sanyo Projector, check the Ceiling function.
J
Justin MillerAug 25, 2025
What to do if some displays are not seen during operations on Sanyo Projector?
- J
  Jeffrey Ortiz Jr.Aug 25, 2025
  If some displays are not seen during operations of your Sanyo Projector, check the Display function.
T
taylorannaAug 27, 2025
How to fix Sanyo PLC-XP57L when it has no power?
- R
  rturnerAug 27, 2025
  If your Sanyo Projector isn't turning on, ensure the power cord is securely plugged into an AC outlet and that the READY indicator light is on. After turning the projector off, wait 90 seconds before attempting to restart it. Check the WARNING TEMP and READY indicators; if both are blinking, the projector cannot be turned on. Finally, inspect the projection lamp.
E
Eric BentonAug 30, 2025
Why does my Sanyo PLC-XP57L Projector remote control not work?
- C
  candacegriffithAug 31, 2025
  If the remote control for your Sanyo Projector isn't working, start by checking the batteries and ensure the ALL-OFF switch is set to “ON.” Make sure there are no obstructions between the remote and the projector's infrared receiver. Also, ensure you're within the remote's operating range of 16.4’ (5 m). Finally, verify the remote control code.
M
megan57Sep 3, 2025
How to fix a blurry image on a Sanyo PLC-XP57L?
- W
  Wayne HarrisSep 3, 2025
  If the image from your Sanyo Projector appears out of focus, try adjusting the focus. Ensure that the projection screen is at least 4.6’ (1.4 m) away from the projector. Inspect the projection lens and clean it if necessary. If humidity changes are the cause, leave the projector off until the condensation evaporates.
L
Lori BurnsSep 6, 2025
How to troubleshoot no sound on Sanyo Projector?
- M
  Mark SmithSep 6, 2025
  If you're not getting any sound from your Sanyo Projector, check the audio cable connection from the audio input source. Adjust the audio source, press the VOLUME (+) button, and ensure the MUTE button is not activated.
X
xbrownSep 9, 2025
What to do if wireless mouse function does not work with Sanyo Projector?
- M
  Melody BrockSep 9, 2025
  If the wireless mouse function isn't working with your Sanyo Projector, first check the cable connection between the projector and your computer. Then, verify the mouse settings on your computer. Finally, make sure you turn the projector on before turning on your computer.

Sanyo PLC-XP57L Specifications

General

Number of colors	1.073 billion colors
Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Resolution	2359296 pixels
Aspect ratio	4:3
Dimensions (WxDxH)	319 x 429.5 x 168 mm
Power requirements	100-240 V AC, 50/60 Hz
Lamp type	UHP
Lamp power	318 W
Light source type	Lamp
Noise level	36 dB
Dot clock scanning frequency	180 MHz
Analog signal format system	NTSC, NTSC 4.43, PAL, SECAM
Audio (L/R) in	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	1
VGA (D-Sub) ports quantity	5
Component video (YPbPr/YCbCr) in	3
Power consumption (standby)	15 W
Power consumption (typical)	480 W

Weight and Dimensions

Weight	7900 g

Summary

Safety Precautions and Instructions

General Safety and Environmental Guidelines

Safety advice for operation, environment, and ceiling mounting.

Operational and Electrical Safety

General safety, electrical shock, fire hazards, and servicing precautions.

Compliance Information

FCC rules, interference mitigation, and AC power cord requirements.

Features and Design Overview

Key Projector Features and Capabilities

Highlights compact design, compatibility, image quality, and advanced functions.

Preparation, Setup, and Connection

Projector Components and Installation Warnings

Identifies projector parts, lens cap, and exhaust vent safety.

Connecting the AC Power Cord and Lens Installation

Steps for connecting power and installing the projector lens.

Adjusting Feet, Positioning, and Moving Safely

Adjusting feet, proper placement, and safe handling procedures.

Projector Terminals and Input Connections

Diagrams and descriptions of terminals and input connection types.

Connecting Computers and Video Equipment

Details connecting computer and video sources using various cables.

Before Operation Procedures

Remote Control Functions and Laser Pointer

Explains remote buttons, laser pointer function, and safety.

Remote Control Operations and Battery Installation

Details button operations and battery installation for the remote control.

Top Controls, Indicators, and On-Screen Menu Navigation

Identifies controls, indicators, and guides on-screen menu usage.

Menu Bar Structure and Options

Overview of menu bar options for PC and Video sources.

Basic Operation

Powering On, Off, and PIN Code Entry

Step-by-step guide for powering on, off, PIN code entry, and security.

Screen Adjustment Features

Adjusting zoom, focus, lens shift, and keystone correction.

Picture and Sound Functions

Using freeze, no show, P-timer, and sound adjustment features.

Computer Input Configuration

Selecting Computer Input Source and Setup

Guide on selecting input sources and setting up the Input 1 terminal.

Auto and Manual PC Adjustment

Automatic and manual adjustments for PC input signals.

Picture Image and Screen Size Adjustment

Adjusting image level, screen size, and digital zoom.

Video Input Configuration

Selecting Video Input Source and System

How to select input sources and video system formats.

Video Picture Image and Screen Size Adjustment

Adjusting image level, screen size for video signals.

Picture Image Adjustments

Basic Image Settings

Adjusts contrast, brightness, color, tint, and sharpness for optimal image.

Advanced Color Management and Tuning

Fine-tunes colors, phase, gamma, and stores custom settings.

Detailed Image Tuning Options

Adjusts white balance, sharpness, gamma, noise, and progressive scan.

Setting Menu Configuration

Setting Menu Overview and Language Selection

Accesses settings, selects language, and configures keystone.

Logo, Projection Modes, and Power Management

Customizes logo, projection modes, and power management settings.

Startup, Lamp Control, and Remote Codes

Configures auto-start, lamp control, and remote code management.

USB, Wireless Mouse, and Security Locks

Sets USB mode, wireless mouse, key lock, and PIN lock functions.

PIN Code Lock Configuration

Configures PIN code lock settings and procedures for entering/changing PIN.

Maintenance Settings

Resets lamp counter and restores factory default settings.

Appendix and Specifications

Wireless Mouse Operation and Installation

Instructions for operating and installing the remote as a wireless mouse.

Maintenance: Filter, Lens, and Lamp Care

Explains indicators, filter cleaning, lens cleaning, and lamp replacement.

Troubleshooting Common Issues

Common problems like no power, focus, or image reversal with solutions.

Technical Specifications and Compatibility

Lists compatible computer specs, input compatibility, and indicators.

Terminal Configurations and Optional Parts

Terminal pin configurations, optional parts, lens replacement, and PJ Link.

Projector Dimensions and PIN Code Memo

Provides physical dimensions and space to record PIN codes.

Related product manuals