Sanyo PLC-XP57L User Manual

42
SETTING
This Projector has a USB port for interactive operation between the
projector and computers. Set the mode by following the steps
below.
Wireless Mouse mode
Select “ ” when controlling a computer with the remote control of
this projector.
Projector mode:
“” Not used.
USB
Security
This function locks operation of the top control and remote
control. It helps to prevent operation by an unauthorized
person.
. . . . unlocked.
. . . . locks operation of the top control.
To unlock, use the remote control.
. . . . locks operation of the remote control.
To unlock, use the top control.
If the top control accidentally becomes locked and you do not
have the remote control nearby, unplug the AC power cord
from the AC outlet, and then hold down the SELECT button
and reinsert the AC power cord. This will cancel the top
control lock.
Key lock
Key lock
Security
Select Key lock and
this box appears.
Choose one of the
alternatives with the
POINT UP/DOWN
buttons and select
[Yes] to activate it.

Sanyo PLC-XP57L Specifications

General

Number of colors	1.073 billion colors
Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Resolution	2359296 pixels
Aspect ratio	4:3
Dimensions (WxDxH)	319 x 429.5 x 168 mm
Power requirements	100-240 V AC, 50/60 Hz
Lamp type	UHP
Lamp power	318 W
Light source type	Lamp
Noise level	36 dB
Dot clock scanning frequency	180 MHz
Analog signal format system	NTSC, NTSC 4.43, PAL, SECAM
Audio (L/R) in	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	1
VGA (D-Sub) ports quantity	5
Component video (YPbPr/YCbCr) in	3
Power consumption (standby)	15 W
Power consumption (typical)	480 W

Weight and Dimensions

Weight	7900 g