Sanyo PLC-XP57L User Manual

52
APPENDIX
Computer Input
MENU TREE
Input
RGB (PC analog) Go to System
(1)
Input 1
Y, Pb/Cb, Pr/Cr
Computer Input/Video Input
RGB (Scart)
RGB (PC digital)
RGB (AV HDCP)
Monitor out
Video
RGB
Go to System
(2)
Go to System
(3)
Go to System
(1)
Go to System
(2)
Video
Y, Pb/Cb, Pr/Cr
S-Video
Go to System
(3)
Go to System
(2)
System
(1)
Input 2
Input 3
Mode 1
Mode 2
SVGA 1
SVGA 2
SVGA 3
Image Select
Standard
Real
Image 1
Image 10
Screen
Normal
True
Wide
Full
Digital zoom +
Digital zoom -
PC Adjust
Auto PC adj.
Fine sync.
Total dots
Position H
Position V
Current mode
Clamp
Display area - H
Display area - V
Reset
Mode free
Store
Quit
0–31
Yes/No
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Quit
✽ System displayed in the System Menu varies depending on the input signal.

Sanyo PLC-XP57L Specifications

General

Number of colors	1.073 billion colors
Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Resolution	2359296 pixels
Aspect ratio	4:3
Dimensions (WxDxH)	319 x 429.5 x 168 mm
Power requirements	100-240 V AC, 50/60 Hz
Lamp type	UHP
Lamp power	318 W
Light source type	Lamp
Noise level	36 dB
Dot clock scanning frequency	180 MHz
Analog signal format system	NTSC, NTSC 4.43, PAL, SECAM
Audio (L/R) in	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	1
VGA (D-Sub) ports quantity	5
Component video (YPbPr/YCbCr) in	3
Power consumption (standby)	15 W
Power consumption (typical)	480 W

Weight and Dimensions

Weight	7900 g