Sanyo PLC-XP57L User Manual

44
This function is used to reset the Lamp replacement counter. When
replacing the projection lamp, reset the Lamp replacement counter
with this function. See page 49 for operation.
Lamp counter
Factory default
This function returns all setting values except for the User logo,
Key lock, PIN code lock, Logo PIN code lock, and the Lamp counter
to the factory default settings.
Factory default
SETTING
Quit
Exit the SETTING Menu.
Select Factory default and this box
appears. Select [Yes], and the next
box appears.
Select [Yes] to
activate it.

Sanyo PLC-XP57L Specifications

General

Number of colors	1.073 billion colors
Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Resolution	2359296 pixels
Aspect ratio	4:3
Dimensions (WxDxH)	319 x 429.5 x 168 mm
Power requirements	100-240 V AC, 50/60 Hz
Lamp type	UHP
Lamp power	318 W
Light source type	Lamp
Noise level	36 dB
Dot clock scanning frequency	180 MHz
Analog signal format system	NTSC, NTSC 4.43, PAL, SECAM
Audio (L/R) in	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	1
VGA (D-Sub) ports quantity	5
Component video (YPbPr/YCbCr) in	3
Power consumption (standby)	15 W
Power consumption (typical)	480 W

Weight and Dimensions

Weight	7900 g