65
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering, give the following information to the
dealer.
● Model No. of your projector : PLC-XP200L
● Replacement Lamp Type No. : POA-LMP124
(Service Parts No. 610 341 1941)
Resetting the Lamp Counter
Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP
REPLACE indicator stops lighting and the Lamp replacement icon disappears.
✔Note:
•DonotresettheLampcounterwithoutreplacingthelamp.Besure
toresettheLampcounteronlyafterreplacingthelamp.
Press the MENU button to display the On-Screen Menu. Use
the Point 7 8 buttons to move the red frame pointer to the
Setting Menu icon
Use the Point ed buttons to move the red frame pointer
to Lamp counter and then press the SELECT button. A
dialog box appears showing the total accumulated time of
the lamp usage and the reset option. Select Reset and the
“Lamp replacement counter Reset?” appears. Select [Yes] to
continue.
1
2
Lamp counter
Select Reset and the “Lamp
replacement counter Reset?”
appears.
Select [Yes] again
to reset the lamp
counter.
Select [Yes], then another
confirmation box appears.
Another confirmation dialog box appears and select [Yes] to
reset the Lamp counter.
3
Maintenance and Care
To Next Page
Loading...
Need help?
General
Weight and Dimensions
