Sanyo PLC-XP200L User Manual

32
Operating with Remote Control
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the ZOOM buttons on the remote control to zoom in
and out the image.
ZOOM buttons
Press the FOCUS buttons on the remote control to adjust
focus of the image.
FOCUS buttons
See page 30 for details.
LENS SHIFT button
Remote Control
D.ZOOM
button
SHUTTER
button
AUTO PC
button
ZOOM
buttons
FOCUS
buttons
LENS SHIFT
button
✔Note:
 •See the next page for the description
ofotherbuttons.
Information display can be used to confirm the current
operating condition of the projector and the signal being
projected through the projector.
Press the INFO. button on the remote control to display the
information window on the screen. To hide the information
window, press the INFO. button again or Point
7 8 buttons.
The information window can also be selected from the
menu.
INFO. button
Information Menu
Information Menu
Basic Operation
SHUTTER button
See page 30 for details.
SCREEN
button
INFO. button
Press the AUTO PC button on the remote control to operate
the Auto PC Adj. function. The computer screen adjustment
can be done easily by pressing this button. See page 39 for
details.
AUTO PC button
Press the SCREEN button on the remote control to select
the desired screen size. The selected screen size symbol
appears on the screen for 4 seconds. See pages 43 to 44
and 47 to 48 for details.
Press and hold the SCREEN button for more than 5 seconds
to return all the screen size adjustment setting to the factory
default setting.
SCREEN button
Press the D.ZOOM button on the remote control to enter to
the Digital zoom +/– mode. See page 44 for details.
D.ZOOM button
POINT ed7 8
buttons
✔Note:
 •TheH-andV-syncfreq.valuesdescribedinthefiguremaybe
differentfromtheactualvalues.
 •SERIALNO.isusedtoservicetheprojector.

Sanyo PLC-XP200L Specifications

General

Vertical scan range	48 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	±40 °
Lamp type	NSH
Lamp power	330 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Bundled software	User Manual (CD ROM)
I/O ports	DVI-D (digital/HDCP) D-Sub15 (RGB/SCART-RGB) 5 x BNC (RGBHV/Composite/Y-Pb/Cb-Pr/Cr) 3 x RCA (Video/Y-Pb/Cb-Pr/Cr) Mini DIN 4 (S-Video) 3.5 mm Stereo Jack D-Sub15 D-Sub9 (RS232) 3.5 mm Stereo Jack (cable remote control) USB type B
Compatibility	UXGA SXGA SXGA+ WXGA XGA S-VGA VGA Mac
Dimensions (WxDxH)	370 x 440 x 187 mm
Power requirements	100 - 240 V
Power consumption (standby)	24.5 W
Power consumption (typical)	499 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Placement	Ceiling

Weight and Dimensions

Weight	11400 g
Package weight	15900 g