Sanyo PLC-XP100L - Service Manual

Multimedia Projector
SERVICE MANUAL
PRODUCT CODE
1 122 380 20 (KC3AL)
1 122 381 20 (LC3AL)
1 122 381 22 (LC3CL)
Original Version
REFERENCE NO. SM5110873-00
FILE NO.
Model No. PLC-XP100L
U.S.A, Canada,
Europe, U.K, Asia
* Projection lens is optional.
Chassis No. KC3-XP100L00
Match the Chassis No. on the unit's back cover with the
Chassis No. in the Service Manual.
If the Original Version Service Manual Chassis No. does
not match the unit’s, additional Service Literature is re-
quired. You must refer to “Notices” to the Original Service
Manual prior to servicing the unit.

Sanyo PLC-XP100L Specifications

General

Number of colors	1.073 billion colors
Vertical scan range	48 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	2000:1
Screen size compatibility	31 - 400 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	80 °
Keystone correction, horizontal	40 °
I/O ports	RCA x 3 (YCrCb/Video), BNC x 5 (RGBHV/YCbCr/Video), mini D-sub 15pin x 1
Video out	UXGA / SXGA+ / SXGA / WXGA (Compression) XGA / SVGA / VGA
Resolution	2359296 pixels
Aspect ratio	4:3
Dimensions (WxDxH)	370 x 439.9 x 187 mm
Power requirements	AC 100–240 V, 50 / 60 Hz
Connectivity technology	Wired
Lamp type	NSH
Lamp power	330 W
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
Noise level	31.8 dB
Dot clock scanning frequency	180 MHz
Headphone outputs	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (typical)	490 W
Operating temperature (T-T)	5 - 40 °C
Product type	Large venue projector

Weight and Dimensions

Weight	11700 g