Sanyo PLC-XP100L - Filter Box Removal

-25-
Mechanical Disassembly
9 Filter box removal
1 Remove 1 screws A (T3x8), 2 screws B (T4x40) and take
filter box upward off.
9-1 Filter box and fan (FN901) disassembly-1
1 Remove 3 screws C (T4x35), and take fan (FN901) and
holder off.
2 Remove 1 screw D (T3x14) and take the wind sensor
(S901) off.
A
Filter box
B
B
C
C
C
D
FN901
S901