32
Chapter 4 Controlling the Projector
Power control and status check
Click Power & Status on the main menu. The control page will be dis-
played.
By clicking ON or Standby button on the page, the power of the projector can be con-
trolled.
Item Description
PJ status
Power .........................Displa
ys the status of the lamp. (ON, OFF, On starting up, On cooling down)
Status ..........................Displa
ys the status of the projector's power. (Refer to next page.)
P
ower control........Controls the projector power by clicking the "ON" or "Standby" button.
Popup confirmation window
Confirmation window
as shown in the below
appears when the
Standby
button is pressed.
The projector cannot be turned on while the projector is on cooling down.
The web browser checks and updates the projector's condition every 30 seconds automatically.
To Next Page
Loading...
Need help?
General
