6
Chapter 1 Preparation
Features
E-Mail Alert function (p.25)
The projector sends mes-
sages to the registered e-mail
addresses when a lamp abnor-
mality or power failure occurs
with the projector. This mes-
sage describes how to solve the
cause of the problems. You can
take efficient action for quick
recovery.
PC4PC3 PC6
PC5
PC1 PC2
You’ve got
Mail.
PJ2
PJ1
Web Management function (p.31)
With this function, you can
monitor projector functions
such as power status, lamp
status, input mode, signal
condition, lamp-use time, etc.
through the network by using
the web browser installed on
your computer.
PC4PC3 PC6
PC
PC PC
Turn ON PJ2
P
P
SNMP Agent function (p.29)
To send the information of the projector to the SNMP manager. Enables you to manage
the projector condition with the supplied SNMP manager software.
SNMP Manager function
A function to manage the
condition of projectors in
the network by using the
SNMP protocol. The man-
aging computer needs to
provide an SNMP manag-
ing software. Refer to the
owner's manual of the "PJ
Network Manager" sup-
plied separately for further
details.
PJ1
PC6
PC4
P P3 P4
PC
You received
a Trap.
SNMP Manager
Trap
Trap
To Next Page
Loading...
Need help?
General
