40
Chapter 4 Controlling the Projector
Item Description
Ceiling.....................S
ets the image top/bottom and left/
right reversed. (ON, OFF)
Rear...........................S
ets the image left/right reversed. (ON,
OFF)
P
ower
management.....S
ets into the selected power manage-
ment mode (OFF, Ready, Shutdown) if
the input signal is interrupted and no
control key is pressed for the specified
period of time.
*
The specified time can be set 1 t
o 30
min.
On start ..................S
ets the power-on mode when the AC cord is connected to the outlet.
Lamp control......Selects lamp control mode. (Normal, Eco)
Lamp life
control ....................S
elects lamp life control mode (Mode1, Mode2) when the total use time exceeds
the recommended total hours of use.
Item Description
Language..............S
ets the language display of projector's
on-screen display menu.
A
uto setup...........Executes the Auto PC Adj, and Input
Search function below according to the
each setting after clicking
Start button.
Auto PC Adj. .....Sets Auto PC Adjustment mode. (ON,
OFF)
I
nput search.....Sets the auto-input signal detection
mode. (ON1, ON2, OFF)
Auto keystone....
Sets Auto Keystone mode. (Auto, Manual,
OFF)
Background.........S
ets the screen background when no signal input. (Blue, User, Black)
Display....................S
witches on or off the on-screen menu display on the screen. (OFF, Countdown Off,
ON)
C
ountdown off .......Displays image during the starting up.
Logo .........................S
ets on or off the logo display on the screen during the startup. (User, Default, OFF)
Setting 1
Setting 2
To Next Page
Loading...
Need help?
General
