Sanyo PLV-Z3 - 6. AV BOARD REMOVAL

-11-
Mechanical Disassemblies
4. DOOR ASS'Y REMOVAL
1. Remove 6 screws to take the Door Ass'y off.
Note: Can be removed Door itself. See below.
5. DOOR LEG AND DOOR SWITCH BOARD REMOVAL
1. Remove a screw to take each leg off.
2. Slide the Door Switch Board out.
Fig. 4
Door Ass'y
Door
Door Switch Board
Door Leg
Fig. 5
6. AV BOARD REMOVAL
1. Remove 1 screw A and 1 screw B to take the AV Ass'y
(Board with Panel) upward off.
2. Remove 2 screws C, 4 screws D and 1 screw E to
take the AV Board off from the AV Panel.
AV Board
Fig. 6
AV Panel
D
A
B
D
D
D
E
C
C