Sanyo PLV-Z3 - 4. POLARIZED GLASS-IN REMOVAL

Optical Parts Disassemblies
-16-
3. RELAY LENS REMOVAL
1. Remove 2 screws A and pull the Relay Lens Ass’y
upward.
2. Remove 2 screws B to take the Lens off from the
Holder.
Relay Lens
Relay Lens Ass’y
Fig. 3
A
B
A
B
4. POLARIZED GLASS-IN REMOVAL
1. Remove each screw and pull the Polarized Glass-In
Ass’y upward.
2. Unhook the stoppers and take the glass off upward.
Polarized Glass Ass’y
Polarized
Glass-In
Phase Sheet
Hook
Note:
Should be placed the glass as the film attached side
come to the prism side.
Fig. 4
Polarized
Glass-In
Phase Sheet
Hook
Red & Green
Blue
R
G
B