Sanyo PLV-Z3 - Page 17

-17-
Optical Parts Disassemblies
5. POLARIZED GLASS-OUT AND WIDE VIEW PLATE REMOVAL
1. Remove 4 screws A and take the LCD Panel/Prism
Ass’y upward from the Optical Unit.
2. Remove the stopper and take the glass off upward.
LCD Panel/Prism Ass’y
Note:
1.
Should be replaced the glass as the film attached
side comes to the LCD panel side.
Fig. 5
Polarized
Glass-Out
Film
Note 1
A
A
A
A
6. OPTICAL UNIT TOP REMOVAL
1. Remove Cabinet Top, Cabinet Front, Main Board, AV
Board and Filter Ass'y.
2. Remove 8 screws to take the Optical Unit Top off
upward.
Fig. 6
Stopper
Optical Unit
Top