Sanyo PLV-Z3 - 7. LOCATIONS IN OPTICAL UNIT

Optical Parts Disassemblies
-18-
7. LOCATIONS IN OPTICAL UNIT
When mounting or assembling the optical parts in the optical unit, the parts must be mounted specified location as shown
in figure below.
6
1
2
3
4
5
7
8
9
10
11
11
12
13
15
14
16
17
18
Marking
Marking
Cut Face
Cut Face
1 Lens (Condenser G)
2 Lens (Condenser R)
3 Prism Beam Splitter (PBS)
4 Condenser Lens (Out)
5 Condenser Lens (B)
6 Relay Lens (In)
7 Relay Lens (Out)
8Integrator Lens (In)
9Integrator Lens (Out)
10 Mirror (R)
11 Mirror (B)
12 Optical Filter (R, G)
13 Optical Filter (UV Cut)
14 Polarized Glass (IN/R)
15 Polarized Glass (IN/B)
16 Polarized Glass (IN/G)
17 Dichroic Mirror (G)
18 Dichroic Mirror (R)
Key No. Description