Sanyo PLV-Z4 - Main Power Assembly Removal

- 21 -
7-1
Main power ass'y removal.
1. Remove the screw-A(M3x8) and disconnect the lamp connector.
2. Remove the 4 screws-B(T3x8), remove the screw-C(M3x6) and remove the Main power ass'y .
7
-2
Main power ass'y disassemblies-1.
1. Remove the 3 screws-A(M3x6) and remove the Cover power top ass'y.
B
C
A
B
B
B
Fig. 7-1
Main power ass'y
Lamp connector
A
A
A
Fig. 7-2
Cover power top ass'y
Mechanical disassemblies