Sanyo PLV-Z4 - Page 22

- 22 -
A
A
A
B
B
7-3
Main power ass'y disassemblies-2.
1. Remove the 4 screws-A(M3x9.2) and remove the Fan(FN901).
7-4
Main power ass'y disassemblies-3.
1. Remove the 3 screws-A(M3x6) and remove the Power board.
2. Remove the 2 screws-B(T3x8), remove the Ballast unit and remove the Holder.
A
A
A
A
Power board
Holder
Ballast unit
Cover power bottom
FN901
Fig. 7-3
Fig. 7-4
Mechanical disassemblies