Sanyo PLV-Z4 - Optical Base Lamp Assembly Removal

- 23 -
A
A
A
8-1
Optical base lamp ass'y removal.
1. Remove the 3 screws-A(T3x8) and remove the Optical base lamp ass'y.
Optical base lamp ass'y
8-2
Optical base lamp ass'y disassemblies.
1. Remove the screw-A(M3x6) and remove the thermal switch ass'y.
2. Remove the 2 screws-B(T3x8) and remove the Thermal switch(SW902).
3. Remove the 2 screws-C(T3x8), remove the Lamp exhaust duct and remove the Lamp
exhaust filter.
Fig. 8-1
Mechanical disassemblies
B
B
Thermal switch(SW902)
Thermal switch holder
Optical base lamp
Thermal switch ass'y
Lamp exhaust filter
Lamp exhaust duct
Fig. 8-2