Sanyo PLV-Z60 - Top Control

10
Part Names and Functions
Top Control
qwer
t y u i
i INPUT button
Select an input source (p.24).
t MENU button
Open or close the On-Screen Menu (p.20).
e WARNING indicator
– Lights red light when the projector detects an
abnormal condition.
– Blinks red when the internal temperature of the
projector exceeds the operating range (pp.42, 50).
w
POWER indicator
– Lights red while the projector is in stand-by mode.
– Lights green during operations.
– Blinks red during the cooling-off period.
– Blinks green in the Power management mode (p.39).
– Blinks orange when the automatic slide shutter is
closed during operations (p.50).
u POINT ed7 8 buttons
Select an item or adjust the setting values in the On-
Screen Menu, or use them to pan the image in the
Normal through mode (p.35).
y OK button
Execute the item selected or use it to access the
submenu items (p.20).
r LAMP REPLACE indicator
Lights yellow light when the projection lamp reaches its
end of life (pp.47, 50).
q POWER ON/STAND-BY button
Turn the projector on or off (pp.18, 19).