Sanyo PLV-Z60 - Connecting to Video Equipment (HDMI, RGB Scart); Connecting to a Computer

17
Installation
Connecting to a Computer
RGB Scart
Use a Scart-VGA cable (optional).
SERVICEPORT
HDMI 1 COMPUTER
COMPONENT 1
COMPONENT 2
S-VIDEO
HDMI 2
VIDEO Pb/CbYPr/Cr
Video Equipment
COMPUTER
RGB Scart
21-pin Output
Scart-VGA
Cable
SERVIC
HDMI 1
COMPUTER
COMPONENT 1
COMPONENT 2
S-VIDEO
HDMI 2
VIDEO
Pb/CbYPr/Cr
Video Equipment
HDMI
HDMI
Cable
HDMI
Use a HDMI cable (optional) for HDMI output.
Connecting to Video Equipment (HDMI, RGB Scart)
HDMI Video
Output
Unplug the power cords of both the projector and external equipment from
the AC outlet before connecting the cables.
✔Note:
• To order the optional cables, see page 55.
SERVICEPORT
HDMI 1 COMPUTER
COMPONENT 1
COMPONENT 2
S-VIDEO
HDMI 2
VIDEO Pb/CbYPr/Cr
COMPUTER
IBM-compatible or Macintosh computer
Monitor Out
Computer (Analog)
Use a VGA cable (commercially available) or a DVI-VGA cable
(commercially available).
DVI-VGA
Cable
VGA
Cable