12
Operation with the Remote Control
Unit
1. Automatic Operation
Standard temperature settings during automatic operation
Type of operation Standard temperature setting
Drying 20 °C to 26 °C range
(The exact temperature depends on the prevailing temperature
when the unit starts operating.)
Cooling 27 °C
STEP 2
STEP 3
STEP 1
OI-645-12EG
STEP 1 Press the MODE selector button and select (AUTO).
STEP 2 Press the ON/OFF button and switch the air conditioner ON.
STEP 3 Press the temperature setting buttons (TEMP.).
The air conditioner starts operating after automatically selecting the type of operation
—whether drying (dehumidifying) or cooling—that suits the conditions in the room, and
automatically adjusting the temperature and fan speed.
Each time one of the temperature setting buttons (TEMP.) is pressed, the temperature is
changed by 1 °C.
The temperature can be changed from +4 °C (higher) to
–4 °C (lower) from the standard temperature setting.
(The upper limit during cooling is 30 °C.)
To Next Page
Loading...
Need help?
General
