Sanyo SAP-KM97GHS5A - Check Fuse on the Indoor PCB Assy; Check TIMER SELECT Button on the Remote Control Unit

D. Check fuse on the indoor PCB Ass'y.
E. Check TIMER SELECT button on the remote control unit.
OK
Replace the fuse.
OK
OK
•
Check fuse on indoor PCB Ass'y
for continuity. (F)
•
Check operation lamp to see
if light is ON.
Light is OFF
•
Measure resistance of primary and
secondary winding of transformer.
(TR)
Indoor PCB Ass'y or switch Ass'y is
defective.
OK
•
Measure resistance of indoor fan
motor winding.
(FMI)
•
Measure resistance of flap motor
winding. (FLP)
If fuse has been blown,
•
Timer is turned ON. Check to see
if "ON" is displayed on remote
control
YES
Press TIMER ON button to cancell
the timer mode.