Sanyo VCC-XZ200P - Page 13

12
Getting Started
Password Lock Setting/Cancelling <PASSWORD>
4
Select “PASSWORD CHANGE” and press the
SET button.
RThe <NOW PASSWORD> “????” screen appears.
5
Enter the current password and press the SET
button.
RThe <NEW PASSWORD> “????” screen appears.
6
Enter a new password (4 numerical values) and
press the SET button.
☞ Write down the new password before you forget it.
RYou will see the “OK” message.
7
Press the SET button.
RReturns to the “PASSWORD” screen.
8
Set “MENU” to “END” and press the SET button.
RFinishes the setting screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select “BACK” and
press the SET button.
PASSWORD
PASSWORD LOCK
·PASSWORD CHANGE
ON y
SET y
·PASSWORD
CHANGE
SET
R
PASSWORD
<NOW PASSWORD>
· 1234
x
SET y
SET
R
■ To cancel the password lock
Press the SET button on “PASSWORD LOCK” – “ON”, and then
enter the password. You will see “OFF” instead of “ON”.
L5BJ2_XE(GB).book 12 ページ ２００６年３月２２日 水曜日 午後３時４９分