Sanyo VCC-XZ200P - Adjusting Synchronization Error <SYNC; L-L SETTING (Line Lock)

13
Adjusting Synchronization Error <SYNC>
By default, the synchronization adjustment for the camera is performed internally (INT). However, you must make adjustments
in the Line Lock (L-L) Setting screen, if the monitor screen seems out of sync after switching over among multiple cameras
using AC 24 V.
Note: The Line Lock setting is not available for DC 12 V operation.
1
Adjusting Synchronization (0 – 524).
• Make adjustments so that the vertical synchronization of the
monitor screen does not move up or down.
2
Set “MENU” to “END” and press the SET button.
RFinishes the setting screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select “BACK” and
press the SET button.
L-L SETTING (Line Lock)
·SYNC L-L
·SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
PRESET
MENU
L-L y
OFF
SET y
ATW
NORM
0.45
50
HIGH
AUTO y
SET y
OFF
END
L-L SETTING
<V SYNC PHASE>
· 0
PRESET
MENU
OFF
BACK
SET
RR
L-L SETTING
<V SYNC PHASE>
· 250
PRESET
MENU
OFF
BACK
For accessing the Main menu, see pages 5 – 7.
L5BJ2_XE(GB).book 13 ページ ２００６年３月２２日 水曜日 午後３時４９分