Sanyo VCC-XZ200P - Setting Gain Value <AGC GAIN

19
Setting Gain Value <AGC GAIN>
If you need to adjust the sensitivity in dark places (AGC*), follow steps below.
1
Select “AGC GAIN” and specify a mode.
2
Set “MENU” to “END” and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
SYNC
BLC
IRIS
WHITE BALANCE
·AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
50
HIGH
AUTO y
SET y
OFF
END
·AGC GAIN
■ NORM
Normal setting
■ HIGH (For a dark subject)
Setting with which a bright image is obtained in a lower
illuminance than the NORM setting.
• This setting causes noise generation and a grainy image.
■ OFF
Fixed gain setting
For accessing the Main menu, see pages 5 – 7.
*AGC (Auto Gain Control) is a function to adjust automatically the
gain of the Video signal from the camera so that an optimum signal
level is obtained according to brightness of the object.
L5BJ2_XE(GB).book 19 ページ ２００６年３月２２日 水曜日 午後３時４９分