Sanyo VCC-XZ200P - MWB SETTING (Manual White Balance)

18
Adjusting White Balance <WHITE BALANCE>
1
Select “R” or “B” to adjust tint (0 – 255).
R : Adjusting Red
B : Adjusting Blue
• The greater the number, the deeper the tint becomes.
2
Set “MENU” to “END” and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select “BACK” and
press the SET button.
MWB SETTING (Manual White Balance)
MWB SETTING
· R 43
B 66
PRESET
MENU
OFF
BACK
L5BJ2_XE(GB).book 18 ページ ２００６年３月２２日 水曜日 午後３時４９分