Sanyo VCC-XZ200P - Password Lock Setting;Cancelling <PASSWORD

11
Getting Started
Password Lock Setting/Cancelling <PASSWORD>
You can lock the accessing the Main menu by specifying a password. You will be prompted to enter the password to access the
Main menu.
1
Select “PASSWORD LOCK” and press the SET
button.
RThe “PASSWORD (????)” screen appears.
2
Enter the password (default: 1234) and press the
SET button.
RYou will see the “OK” message.
3
Press the SET button.
RDisplays to the “PASSWORD LOCK” – “ON”.
• “1234” is a factory-preset password; it is recommended you
change it to your own password. Advance to step 4.
• If you want to finish the setting, advance to step 8.
·PASSWORD
(SET)
·OPTION
(SET)
SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
·OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
50
HIGH
AUTO y
SET y
OFF
END
OPTION
TITLE
PRIVACY MASK
·PASSWORD
ALARM
LANGUAGE
PRESET
MENU
OFF
SET y
SET y
SET y
SET y
OFF
BACK
SET SET
RR R
PASSWORD
·PASSWORD LOCK
PASSWORD CHANGE
MENU
OFF y
SET y
BACK
·PASSWORD
LOCK
SET
R
Note: If you enter an incorrect password, you will see the “NG”
message. If you fail to enter the valid password three times
successively, the prompt display will disappear.
PASSWORD
· 1234
x
SET y
SET
R
For accessing the Main menu, see pages 5 – 7.
L5BJ2_XE(GB).book 11 ページ ２００６年３月２２日 水曜日 午後３時４９分