91 English
DELETING DATA
4 Toggle the SET button up to select “DELETE”, and press the SET
button.
<DELETE SINGLE>
h The currently displayed image is deleted.
h To delete other data, select the data, select “DELETE” and press the
SET button.
<DELETE ALL>
h The Delete Confirmation Screen again appears. To delete the data,
select “YES”, and press the SET button. When data delete is
completed, “No image” is shown.
CAUTION
i Data which is protected from accidental delete cannot be deleted. To
delete protected data, set the protect setting for the data to off (page 88),
and then follow the data delete procedure.
HINT
i You can also access the Delete Single Confirmation Screen from the
Playback Screen by toggling the SET button up.
To Next Page
Loading...
