75 English
LIGHT-MEASURING MODE SETTING
You can select from 3 types of light-measuring modes.
Multi-section light-measuring:
The exposure is adjusted after sampling from multiple areas of the entire
shooting screen.
Center-weighted light-measuring:
The exposure is adjusted after light is measured from the entire image, but
with emphasis on the center area.
Spot light-measuring:
You can compose the picture and capture the image after first measuring the
light only at the center spot of the monitor.
1 Display PAGE 2 of the RECORDING MENU (page 56).
2 Select the desired light-measuring mode from the light-measuring
mode (EXP MEASURE) menu.
n: Multi-section light-measuring
W: Center-weighted light-measuring
Y: Spot light-measuring
3 Press the SET button.
h This completes the light-measuring
mode setting.
h When spot light-measuring is
selected, the light-measuring spot
mark appears in the center of
the monitor.
12
00:00:52
Light-measuring spot mark
To Next Page
Loading...
