English 136
CHECKING THE REMAINING CARD MEMORY
You can check how many images can be captured and how much recording
time is available on the card. For a table showing the maximum number of
images and recording time for specific cards, please see “Possible No. of
Images/Possible Shooting Time/Possible Recording Time” on page 170.
Checking the remaining number of images and video recording time
1 Turn on the camera (page 24).
h The remaining number of images
appears in the upper left of the
monitor.
h The remaining video recording time
appears in the upper right of the
monitor.
h The remaining number of images
and video recording time will differ
depending on the resolution and
compression settings.
h When the remaining number of
images or the remaining video
recording time is “0”, you cannot
capture any more images. To
capture more images, either install a new card, or save the images to
a computer and then delete them (page 90) from the card.
h When the remaining number of images or the remaining video
recording time is “0”, it may be possible to capture a few more images
by setting a lower resolution setting (page 61), or selecting a different
image quality setting.
For audio data
1 Set the camera to the audio
recording mode (page 48).
h The remaining audio recording
time is shown.
12
00:00:58
Remaining number of images
Remaining video
recording time
12 00:16:00
Remaining time
To Next Page
Loading...
Need help?
General
