Sanyo Xacti VPC-CA6 - Post-View Setting

117 English
POST-VIEW SETTING
Specify the duration that the captured image appears on the monitor
(post-view) after the still image shooting button is pressed.
1 Display the OPTION MENU (page 112).
2 Select the post-view icon o, and
press the SET button.
h The Post-view Screen appears.
1 sec:
The post-view image is displayed
for 1 second.
2 sec:
The post-view image is displayed
for 2 seconds.
OFF:
The post-view image is not
displayed.
3 Select the desired setting, and
press the SET button.
h This completes the post-view
setting.
OFF
2 sec
1 sec
POST VIEW
OK